Skip to main content

iFlight the Force 5.8GHz 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter VTX With MMCX Connector Support OSD

iFlight the Force 5.8GHz 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter VTX With MMCX Connector Support OSD
iFlight the Force 5.8GHz 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter VTX With MMCX Connector Support OSD iFlight the Force 5.8GHz 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter VTX With MMCX Connector Support OSD iFlight the Force 5.8GHz 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter VTX With MMCX Connector Support OSD


Get iFlight the Force 5.8GHz 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter VTX With MMCX Connector Support OSD




Description:
iFlight the Force 5.8G 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter, support OSD Frequency and Power tuning. The output power is stable, the far transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW.

Specifications:
Brand Name: iFlight
Item Name: the Force
Input Voltage: 7-24V DC
Channel: 48
Power Transmission: 0mW / 25mW / 200mW / 400mW /600mW
Size (mm): 36*36mm
Weight: 4.3g(Does not contain antenna)
Connector Type: MMCX Connector
Protocol: IRC Tramp
 
Features:
- Support OSD Frequency and Power tuning;
- The output power is stable, the far transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW;
- Transmit power 6 gear switch: 0mW/25mW/100mW/200mW/400mW/600mW;
- Output 48 frequency points, and has E group 8 race frequency at the same time using each other without interference;
- Frequency lock fast, the boot does not interfere with companions;
- Built-in output power self-check function;
- Full format video format: NTSC /PAL;
- Wide input voltage range. low power consumption; 7V~24V, +12V/260mA@600mW;
- Small volume: 36mm×36mm×5mm; mounting holes correspond exactly CC3D NAZE32 F3 F4 Flying control
- Lightweight: 4.3g(Does not contain antenna)
 
Smart Audio - OSD Frequency and Power Tuning:
Power the Force VTX by 7-24V, Connect the RX port on VTX to FC. Let's take iFlight REVO Bee F4 as an example, RX port on VTX connect to RX port on FC, Video IN on VTX connect to Video Out on FC. Bind Radio control to the receiver, receiver connect to FC finish setting and control via radio control, and open Betaflight, choose UART6 in Port configuration on Betaflight, IRC Tramp on Peripherals position, click save.
 
And now, connection and debug on Betaflight is finished. Now you can debug via radio control, pull the throttle to middle, Yaw to far left, Pitch to top, and now there will be debugging interface popup, Pitch up/down as choose, Yaw left-right as confirm and quit, you can set PID, OSD, Frequency and channel, VTX power, after finishing setting you can quit and fly.
 
Package Included:
1 x The Force 5.8GHz PIT/25mw/200mw/600mw VTX
1 x 1.25T 5Pin connecting cable
1 x  MMCX pigtail cable
1 x Instruction

 




















iFlight the Force 5.8GHz 48CH 0/25/100/200/400/600mW Switchable FPV Transmitter VTX With MMCX Connector Support OSD See detail


Popular posts from this blog

External Triple SATA IDE HDD Docking Station 2.5''/3.5''Hard Drive Enclosure Card Reader USB 3.0

Get External Triple SATA IDE HDD Docking Station 2.5''/3.5''Hard Drive Enclosure Card Reader USB 3.0 Description:   This three-bay drive docking station supports 2.5" & 3.5" SATA/IDE HDD, direct plug bare disc without installing. Besides, it supports hard disk offline clone. And it can simultaneously read two hard disk drives (6TB * 2) (Two SATA or one SATA and IDE), two USB 3.0 expansion HUB interfaces. You deserve it!   Specification:   Model: A61509 Product Name: External Triple SATA IDE HDD Docking Station Color: Black & Red Material: ABS HDD supported: 2.5"/3.5" SATA and IDE HDD capacity: Up to 2TB Interface: 1 x USB 3.0, 1 x USB Hub, 1 x XD, 1 x MS, 1 x SD, 1 x CF, 1 x M2, 1 x TF Power supply input: 100~240V, 50~60hz Power supply output: 12V, 3A OS supported: Win 98/ME/2000/XP/Vista/Win 7,Win 8 , Linux Size: 138mmx130mmx65mm (LXW) Interface: USB 3.0 To Fit: 3.5" Drive/2.5" Drive P
Read more

2/3/4 Tier Flower Pot Stand Wooden Indoor Plant Garden Planter Shelf Wood Rack

Get 2/3/4 Tier Flower Pot Stand Wooden Indoor Plant Garden Planter Shelf Wood Rack Technical Specifications: Type: Plant Display Stand Color: As shown Material: Bamboo 2 Tiers Size: 32*32*75cm/12.6*12.6*29.5" (L*W*H) 3 Tiers Size: 32*32*100cm/12.6*12.6*39.4" (L*W*H) 2 Tiers Size: 32*32*120cm/12.6*12.6*47.2" (L*W*H) Features and Benefits: - Size: 2-Tier: L 32cm × W 32cm × H 75cm. 3-Tier: L 32cm × W 32cm × H 100cm. 4-Tier: L 37cm × W 37cm × H 120cm. - Material: Bamboo. Thick sheet metal, wood tough, strong, durable, load-bearing stronger. - Hardware: Carbon steel screws, durable, stable and not shaken. - Process: The surface texture is clear, uniform color, beautiful and generous. Surface varnish treatment, smooth and no burr. - Multipurpose use: This design flower racks can be placed your favorite potted plants or your shoes, handbags and other items. And your beautiful handicrafts and elaborate artworks as bookshelves or de
Read more

Drillpro Electric Hammer Drill Dust Cover Impact Drill Dust Collector Attachment Universal Dust Shroud for Drilling

Get Drillpro Electric Hammer Drill Dust Cover Impact Drill Dust Collector Attachment Universal Dust Shroud for Drilling Description: Drillpro Electric Hammer Drill Dust Cover Impact Drill Dust Collector Attachment Universal Dust Shroud for Drilling   Specification: Material: PC Size: 285*145*75mm   Feature: - Vacuum nozzles and can also fit other nozzle sizes with adapters. - Rubber seal maintains suction to wall and ensures dust containment. - Hose receiver swivels to allow for repositioning of the hose as needed.   Package Included: 1 x Dust Shroud   More Details:   Drillpro Electric Hammer Drill Dust Cover Impact Drill Dust Collector Attachment Universal Dust Shroud for Drilling See detail
Read more